Rare treat gardeners to Halloween Pinata Vision card

Trick or treat? It seems Rare opted for the treat option and have released a Piñata Vision Card to coincide with Halloween tomorrow. The card, which should only be used on the day (31st October), adds new Halloween-related content to your garden in the rather impressive Viva Piñata: Trouble in Paradise. A guide on how to use the Piñata Vision card can be found at the bottom of this post.

Using the card contributes to the ‘Card Sharp’ and ‘Master Card Sharp’ achievements. More Viva Piñata cards can be found here, here, here and here. What do you think the card adds to your garden? Discuss the Vision card and the game by leaving a comment below.

[Source: Xbox 360 Fanboy]

A Guide on How to Use Viva Pinata Vision Cards

1. Pinata Vision only becomes active after you’ve completed the tutorial and reach level 4. If you try to use the Vision camera before this it won’t work. Leafos will prompt you when you can start using your cards.

2. Make sure the zoom on the camera is turned all the way around to the right. If that doesn’t work, try turning it all the way to the left.

3. Make sure you’re in a very well lit room. You need a lot of light, but be careful that there’s no glare on the card.

4. The easiest way to use a card is to print it out from a colour printer. Move the paper slowly towards the camera until the blue lines capture the edges of the card. Keep moving it forward slowly until the light goes green. The card will usually fit the Pinata Vision window perfectly before the Pinata pops into your garden.

5. If you do need to use your Vision Camera on your computer screen, make sure the screen is bright and there’s no glare on it. If you have a laptop it’s easier to move the screen than the camera.

6. If you’re getting a red light keep trying the card at slightly different angles – eventually it will be picked up.

7. If you’re getting amber light then the card has been recognised but there’s some other problem stopping you from getting the Pinata.

8. One general point – if the barcode or any of the borders of the card are obscured it won’t work. Make sure there’s no glare or misplaced fingers over the borders of the card.

(Thanks AceyBongos for the tip)

Share this article

WhatsApp
X
Facebook
Reddit
Email

Related Articles